electronic cigarette charged
Chargers

Why is not an electronic cigarette charged?

The basic failures of the electronic cigarette arise due to ignoring the recommendations for the use of the device, and as a result, the lack of preventive measures. So, what if the electronic cigarette does not work?

Possible problems in the work of cigarettes

To prolong the life of this device, you need to understand the essence of a possible problem. The most common faults are:

  • Absence of steam.
  • The device does not work after 1-2 puffs.
  • The appliance is very hot.
  • The device does not charge or is quickly discharged.

The last breakdown occurs quite often, so it is worthwhile to find out the reason and answer the question: “What if the device does not charge?”.

Reasons for lack of charging

Often, an electronic cigarette is not charged due to the complete discharge of the PCC. In this case, you just need to wait 10-15 minutes, connecting it to the 220V network.

If this option is not the cause, then the fault occurred due to one of the five main causes of the failure. What could it be?

  • USB charging failed: no current from the battery to the cigarette.
  • No contact between the battery and the charger.
  • The card on the batteries has burnt out, for example, because of falling into the inside of the liquid or voltage drop.
  • Short circuit in the device itself on the board.
  • Ruptures and mechanical damage to the internal contacts of the battery.

The question of charging the battery can be solved in several ways depending on the model, the manufacturer and the reason.

Ways to eliminate problems and breakdowns of electronic cigarettes

You can repair the device yourself. Basic actions: disassembly, cleaning from dust and liquid, refilling the cartridge. After determining the reason for eliminating the problem of lack of charge, there are several ways:

  • Check the charger for service and battery charging.
  • Tighten the inner contacts 1-2 mm upwards.
  • Wipe dry with a napkin and clean the internal parts of the liquid: contacts, board. Do not use a cigarette for 1-2 days.
  • Disassemble the device, pull the contact out of the battery, solder it to the right place.
  • Blow the car.

Electronic cigarettes should be used and recharged strictly according to recommendations and technical instructions. In this case, you can avoid troubles, save time, effort and money for repairs.

Comments

comments